1. hebei jiubai technology co.,ltd supply High strength, light weight. Composite insulator strength and weight ratio is high, that is higher than the strength. Its high mechanical strength source of steel mandrel excellent mechanical properties, is currently a large number of glass steel rods with a tensile strength of up to 1000MPa or more, while the mandrel density of only about 2g / cm3, so its high strength, About 5 to 10 times the quality of carbon steel. At the same voltage level, the weight of the composite insulator is only 1/7 ~ 1/10 of the porcelain insulator.
2.hebei jiubai technology co.,ltd supply Anti-pollution flash performance. Synthetic insulators with hydrophobic, rain in the synthetic insulator umbrella corrugated surface will not wet the formation of water film, but into the water droplets dripping, not easy to constitute a conductive channel, the pollution flashover voltage is higher, with the voltage level Porcelain insulator 3 times. In Jinjiang area, synthetic insulators have been used in pollution areas above grade Ⅲ, which have pooled small thermal power plants, magnet brick factories, foundries and so on. In the same area of pollution and fog conditions, for the use of glass insulator lines, at night to see the obvious corona and hear the clear “leaves creep sound, often need to arrange a power outage for insulator cleaning Work, and synthetic insulators are all subject to the test. The synthetic insulator, which has been operating for three years and subjected to lightning strikes, has not been lost in hydrophobicity and exhibits excellent anti-fouling performance.
3.hebei jiubai technology co.,ltd supply Easy operation and maintenance. Excellent external insulation Excellent resistance to dirt to improve the reliability of the operation of the power system in the dirty areas without porcelain and glass insulators like the regular cleaning, there is no ordinary suspended porcelain insulator zero detection problem, greatly reducing the pollution area insulators Operation and maintenance costs.